DHSI - "SECUR-A-SEAL"

Patents #5,577,349, #6,058,654, #6,266,924, #6,381,905,
#6,442,901 and Patents Pending

Standing in the hallway you see no hardware, no light, no threshold...

Standing in the room you see the neat and clean design...

Features and Benefits:
Hallway Side:

clean design because it mounts on the INSIDE of the room
seals out light, noise, odor, smoke
protects the architectural finish of the door inside and outside
guards against illegal entry from the "Hook Tool"
tested for National Forced Entry requirement
can be de-activated from the hallway side for emergency ingress
optional air make-up and still blocks light
allows express checkout
Room Side:

architecturally pleasing slide covers available in champagne, aluminum, or dark duronodic
vacuum cleaners can not damage the door or the door bottom
makes rooms light tight and sound quiet
enhances the aesthetics of the room
HIGHEST LEVEL OF ASSURANCE IN THE INDUSTRY:
"SECUR-A-SEAL" was tested as a fully operational assembly along with the patented "CUSH 'N' SEAL" frame seals. It is also the only sealing system that tests to the allowable tolerances in manufacturing and field installation. Both "SECUR-A-SEAL" and "CUSH 'N' SEAL" were tested to the ETC 100 for the existing national standards for the closing, sealing and securing requirements found in the existing codes of NFPA 105 NFPA 80, ADA and the National Forced Entry This assures the contractor who agrees to comply with other architectural requirements such as AWI and SDI that hinge bind and lock bind will not be a punchlist problem.
DHSI offers a Factory Program of field assistance to contractors and installers to avoid related door and hardware problems.

"SECUR-A-SEAL" and "CUSH 'N' SEAL"
together provide GUEST COMFORT and secure the room against noise, light, odor.
REMEMBER:
Any gap under a door offers easy access without any key or card.

	Features and Benefits: Hallway Side: clean design because it mounts on the INSIDE of the room seals out light, noise, odor, smoke protects the architectural finish of the door inside and outside guards against illegal entry from the "Hook Tool" tested for National Forced Entry requirement can be de-activated from the hallway side for emergency ingress optional air make-up and still blocks light allows express checkout Room Side: architecturally pleasing slide covers available in champagne, aluminum, or dark duronodic vacuum cleaners can not damage the door or the door bottom makes rooms light tight and sound quiet enhances the aesthetics of the room HIGHEST LEVEL OF ASSURANCE IN THE INDUSTRY: "SECUR-A-SEAL" was tested as a fully operational assembly along with the patented "CUSH 'N' SEAL" frame seals. It is also the only sealing system that tests to the allowable tolerances in manufacturing and field installation. Both "SECUR-A-SEAL" and "CUSH 'N' SEAL" were tested to the ETC 100 for the existing national standards for the closing, sealing and securing requirements found in the existing codes of NFPA 105 NFPA 80, ADA and the National Forced Entry This assures the contractor who agrees to comply with other architectural requirements such as AWI and SDI that hinge bind and lock bind will not be a punchlist problem. DHSI offers a Factory Program of field assistance to contractors and installers to avoid related door and hardware problems.
	"SECUR-A-SEAL" and "CUSH 'N' SEAL" together provide GUEST COMFORT and secure the room against noise, light, odor. REMEMBER: Any gap under a door offers easy access without any key or card.

Home \| Brochure \| QUIET-LATCH Sealing Systems \| Performance Based Specifications \| Distribution of DHSI Products \| Company Profile
	Door and Hardware Systems, Inc. 17 Silver Street, Rochester, NY 14611 Phone: 585.235.8543 \| Fax: 585.235.0431 Info@DHSI-Seal.com © Door & Hardware Systems, Inc